Welcome to Surmountor!            English           España
User name: 
Home > Products > LED Controller/Sensor Switch > IR Hand / Door Sensor switch HD-IR01
IR Hand / Door Sensor switch HD-IR01
Hand or Door sensor can be changed automatically.
Product description

Description Dimension Voltage Current Power
IR Hand /Door sensor switch 10x55mm 12-24VDC Max. 8 Amps. 96W for 12V, or 192W for 24V

V+    ----DC input positive
V-    ----DC input negative
DC input parameters    
               Input Voltage    12-24V DC Max.
               Input Current    Max. 8A
LED+  --- Output to LED Strip positive
LED-  --- Output to LED Strip negative
The The two IR diodes head should be put out of PC cover as the picture below.

   The led lamp connected to the output of the IR sensor switch will turn on when the hand pass over the detector within 10cm in distance and will turn off when the hand pass over the detector again. It could also act as a door sensor model. When the door in front of the sensor detector for about 10 second, it would be automatically turn to door sensor model. The light would be on/off when the door open/close.It could turn to hand sensor model again once there no object stay in front of the sensor for 10s.
Choose the hand or door model as you want. The sensor switch will turn on or off with above repeatable steps.
Installation Instructions
Step I: Cut 2pcs Φ5mm holes at the fixture.
Step II: Put the Detector head into the Φ5mm holes.
Step III: Connect wires to the iput end and output end of the control PCB.
copyright © 2015 Shenzhen Surmountor Lighting CO Limited
Follow Us: