Welcome to Surmountor!            English           España
User name: 
Door Sensor IR002
The LED Lamp connected to the output of the IR sensor switch will turn on when the door open over the IR sensor within 10CM in distance, and will turn off when the door close again.
Product description

Description Dimension Voltage Current Power
IR Door sensor switch 10x55mm 12-24VDC Max. 8 Amps. 96W for 12V, or 192W for 24V

V+    ----DC input positive
V-    ----DC input negative
DC input parameters    
               Input Voltage    12-24V DC Max.
               Input Current    Max. 8A
LED+  --- Output to LED Strip positive
LED-  --- Output to LED Strip negative
The The two IR diodes head should be put out of PC cover as the picture below.

The LED lamp connected to the output end. The IR sensor switch will turn on when the door open and would be off when the door close. Detection range is 10cm from the sensor detector to the door.
The sensor switch will turn on or off with above repeatable steps.
Detective Distance: ≤10cm.

Installation Instructions
Step I: Cut 2pcs Φ5mm holes at the fixture.
Step II: Put the Detector head into the Φ5mm holes.
Step III: Connect wires to the iput end and output end of the control PCB.
copyright © 2015 Shenzhen Surmountor Lighting CO Limited
Follow Us: